HLNOF-6 is made of organic and inorganic materials. Through the special production technology and its own strong cementing force, it can make the hydrate dense, hard and strong. It ensures excellent dispersion in concrete and good adhesion with cement matrix. The agent is suitable for all kinds of cement, widely used in highways, Bridges, ports and DAMS. It is especially suitable for the face plate and straight plate of face rock dam, sand discharge tunnel, diversion tunnel, wave wall, seepage prevention wall, concrete shell in hydropower plant, dam top highway, river slope protection, floor, thin wall structure, seawall revetment and other parts projects with erosion and abrasion.
Main technical indicators
Appearance: gray-brown powder. Solid content: 96%.
PH：8-10
The net cement slurry fluidity 180cm.
Main performance indicators
◆In the same water-cement ratio, concrete slump can be increased by more than 15 cm.
◆The water reduction rate can be up to 15-25% while keeping the slump constant.
◆The addition of this agent generally does not need to add other water reducer, when the concrete has antifreeze requirements, can be added to the appropriate amount of aeration agent.
◆Mixing this concrete has good workability, is not easy to produce segregation and bleeding water, easy to vibrate compaction and surface, in order to reduce cavitation erosion, the surface must meet the requirements of the norms of flat foundation, effectively improve the uniformity of cast concrete.
◆The concrete has significant high density wear resistance, high temperature stability, low temperature crack resistance, can effectively enhance the concrete wear resistance, tensile, shear, compression, impact strength. More than 15% cement can be saved while maintaining the same strength.
◆No corrosion to steel reinforcement (no chloride ion in this agent).
Usage
◆Mixing amount range: generally for cementing material dosage of 2-4%, according to the level of concrete can be enhanced to increase the appropriate amount of mixing, but not too much.
◆Investment method: cement, admixture, water, sand, stone, first stir 1-2 minutes, after adding this agent (lag admixture) the best effect. If cement, admixture, sand, stone at the same time mixing (said with admixture) can be this agent and cement at the same time and appropriately extend the mixing time. Do not add the agent directly to the wet aggregate surface, affecting its effect.
◆Before the initial use or replacement of cement varieties, the best dosage should be determined according to the engineering requirements.
◆This product is divided into water-reducing type and non-water-reducing type, which can be provided according to user demand.
Packaging and storage
◆Use inner plastic bag and outer woven bag for double packing, 25kg or 40kg each.
◆The product is divided into water reducing type and non-water reducing type, can be provided according to user demand.
